Nano Leather Sealant 150ML

Nano Leather Sealant 150ML

Nano Leather Sealant 150ML
Product Code: Wolf
Availability: In Stock
Price: 32.20€
Qty:     - OR -  

Wolf’s nano leather sealant “Hiderophobe” is for the impregnation of leather surfaces. This product forms a super-hydrophobic coating on leather surfaces, protecting it from the absorption of liquids and helps prevent dirt and other contamination from adhering to it. Not only will it protect the surface, but application also conditions the leather at the same time to help prevent premature cracking and fading.


Clean the surface thoroughly making sure that no soap or cleaner residue is left behind and allow it to fully dry before application. Evenly and lightly apply a moderate amount of the sealant to the surface with a soft microfiber or sponge applicator. Once the surface has been thoroughly treated, wait 15-20 (in 15 C or 59 F temperature) minutes and apply a second coat for best results. Please allow a minimum of 12 hours to fully cure!


Wolf's Leather Sealant nano coating will form a form a super-hydrophobic, self-cleaning shield on  leather surfaces. This product is especially useful on painted leather surfaces where strong surface protection is paramount. This coating forms a layer of protection that is approximately one molecule thick (1 nanometer = 1– 9 meter = 10– 6 micrometers), as the average size of an atom is 0.2 – 0.5 nanometers thick.


A single nano treatment consists of 3 layers: The first or “bonding layer”, forms the foundation of the coating by becoming part of the substrate itself. Being that this layer actually becomes a permanent part of the surface it's being applied to, this SiO2 or “quartz/glass” layer will protect from the elements for an exceptionally long period of time.

The second “filler layer” anchors to the “bonding layer” and fills the gaps between nano particles to form a homogenous nano surface, which is necessary for the for the last layer to form properly.

The third “hydrophobic layer” bonds to the previously formed layer and provides the surface roughness which creates the hydrophobic lotus effect.

Properties of a  super-hydrophobic (nano) coating:

  1. The coating itself is very thin, circa 1 nanometer thick, which can not be seen by the naked eye
  2. The coating forms a very strong bond to the surface and the “bonding layer” is quite difficult to remove
  3. The coating does not “layer”, meaning that adding several layers will not “build” or make a thicker coating. In other words, it will not adhere to itself.
  4. The coating will repel water and dirt/contamination will not form a strong bond to the treated surface. 


In cold weather, the hydrophobicity of nano coatings may decrease! In these conditions, the moisture in the air tends to form a dense layer of moisture on the surface which can “stick” to the surface and prevent water drops from forming because of the constant moisture in the air. The warm air of nano coating improves.


Nano leather coating: Hiderophobe is a nano coating for leather that forms an invisible coating of protection on leather surfaces. It also helps to enhance the color of the leather. This coating will also help to prevent dirt and other contamination from sticking to the surface.