Nano Polish 150ML

http://www.itm.hu/

Nano Polish 150ML

Nano Polish 150ML
Product Code: Wolf
Availability: In Stock
Price: 9.80€
Qty:     - OR -  

Shine & Seal is an amazing one-step polish that eliminates fine swirls, produces a very high gloss finish and seals the paint with an extremely durable layer protection provided by nano technology. This innovative polish can be used to finish after compounding and as a stand-alone protection product, but is most effective when used in conjunction with our nano paint coatings.

DIRECTIONS

On a clean surface, spread the polish evenly at a low speed (rotary 600-900 RPM or DA 2-3) and then work the polish in at 1500-2200 RPM or DA 5-6 *depending on paint type and hardness* with moderate pressure and allow ample time for it to properly break down. Once corrected, reduce the polishing speed and continue polishing the surface until the desired level of refinement has been achieved. For use with a rotary polisher, DA or by hand. 
                EUH210 - “Safety data sheet available on request.”

Wolf's Paint nano coating (nano Polish, nano Glaze, nano Sealant) will form a form a super-hydrophobic, self-cleaning shield on paint surfaces. This product is especially useful on paint surfaces where strong surface protection is paramount. This coating forms a layer of protection that is approximately one molecule thick (1 nanometer = 1– 9 meter = 10– 6 micrometers), as the average size of an atom is 0.2 – 0.5 nanometers thick.

Nano surface

A single nano treatment consists of 3 layers: The first or “bonding layer”, forms the foundation of the coating by becoming part of the substrate itself. Being that this layer actually becomes a permanent part of the surface it's being applied to, this SiO2 or “quartz/glass” layer will protect from the elements for an exceptionally long period of time.

The second “filler layer” anchors to the “bonding layer” and fills the gaps between nano particles to form a homogenous nano surface, which is necessary for the for the last layer to form properly.

The third “hydrophobic layer” bonds to the previously formed layer and provides the surface roughness which creates the hydrophobic lotus effect.

Properties of a  super-hydrophobic (nano) coating:

  1. The coating itself is very thin, circa 1 nanometer thick, which can not be seen by the naked eye
  2. The coating forms a very strong bond to the surface and the “bonding layer” is quite difficult to remove
  3. The coating does not “layer”, meaning that adding several layers will not “build” or make a thicker coating. In other words, it will not adhere to itself.
  4. The coating will repel water and dirt/contamination will not form a strong bond to the treated surface. 

In cold weather, the hydrophobicity of nano coatings may decrease! In these conditions, the moisture in the air tends to form a dense layer of moisture on the surface which can “stick” to the surface and prevent water drops from forming because of the constant moisture in the air. The warm air of nano coating improves.

Nano coating making on  new car paint:

The nano coating can be on the new car paint surface in two step. In the first step to be treated the surface with nano glaze ( Shine&Glaze). So it will be a smooth and hydrophobic surfaces

In the second step to be treated the surface with nano sealant, (Hard Body or Bodyguard).This strengthens the hydrophobic surface is formed in the first step, and so it will be super hydrophobic surface.

Nano coating making on  used car paint:

The nano coating can be on the new car paint surface in three step. In the first step to be treated the surface with nano polish (Shine&Seal), so you will have an excellent smooth surface and scratch-free. You then need to use the nano-glaze (Shine&Glaze). This strengthens the nano glass coating middle layer. The final step is to use the nano-sealing (Hard Body or Bodyguard), and so it will be super hydrophobic surface.