Nano Rim Sealant 150ML

http://www.itm.hu/

Nano Rim Sealant 150ML

Nano Rim Sealant 150ML
Product Code: Wolf
Availability: In Stock
Price: 27.40€
Qty:     - OR -  

The wheels on your car are just as important to protect as the rest of it, which is why we’ve developed a wheel sealant that will give your rims an unmatched layer of protection that only nano technology can provide. Wolf’s nano rim sealant leaves a glassy finish and protects against adhesion of dirt, brake dust, salt, etc. which means cleaning them will be much easier!

DIRECTIONS

Clean the rim thoroughly before beginning and be sure to remove any imbedded contaminants that my reduce the performance of this sealant. Apply a moderate amount of sealant to an applicator pad and with firm pressure rub the entire rim down, being sure to overlap to ensure complete coverage. Allow to dry for at least 10 minutes and remove with a clean and damp microfiber or by washing the rim with soap and water. For better coverage and protection, a second coat is recommended.

 

Wolf's Rim Shield nano coating will form a form a super-hydrophobic, self-cleaning shield on rim surfaces. This product is especially useful on light metal wheel surfaces where strong surface protection is paramount. This coating forms a layer of protection that is approximately one molecule thick (1 nanometer = 1- 9 meter = 10- 6 micrometers), as the average size of an atom is 0.2 – 0.5 nanometers thick.

Nano surface

A single nano treatment consists of 3 layers: The first or “bonding layer”, forms the foundation of the coating by becoming part of the substrate itself. Being that this layer actually becomes a permanent part of the surface it's being applied to, this SiO2 or “quartz/glass” layer will protect from the elements for an exceptionally long period of time.

The second “filler layer” anchors to the “bonding layer” and fills the gaps between nano particles to form a homogenous nano surface, which is necessary for the for the last layer to form properly.

The third “hydrophobic layer” bonds to the previously formed layer and provides the surface roughness which creates the hydrophobic lotus effect.

Properties of a  super-hydrophobic (nano) coating:

  1. The coating itself is very thin, circa 1 nanometer thick, which can not be seen by the naked eye
  2. The coating forms a very strong bond to the surface and the “bonding layer” is quite difficult to remove
  3. The coating does not “layer”, meaning that adding several layers will not “build” or make a thicker coating. In other words, it will not adhere to itself.
  4. The coating will repel water and dirt/contamination will not form a strong bond to the treated surface. 

In cold weather, the hydrophobicity of nano coatings may decrease! In these conditions, the moisture in the air tends to form a dense layer of moisture on the surface which can “stick” to the surface and prevent water drops from forming because of the constant moisture in the air. The warm air of nano coating improves.

Nano rim coating: Rim Shield is a surface treatment that forms an invisible layer of protection on rims. This coating will increase the shine and will help prevent brake dust and other road contamination from adhering to the surface and will make maintaining them much easier.