Nano Textile Sealant 150ML

Nano Textile Sealant 150ML

Nano Textile Sealant 150ML
Product Code: Wolf
Availability: In Stock
Price: 27.30€
Qty:     - OR -  

For treating automobile seats, carpets, convertible tops and other textile surfaces. This sealant creates a thin layer of protection on textiles, which helps to prevent dirt, other contaminants and  liquids from penetrating the surface. This product will also help reduce wear and pilling on textiles and help to keep treated surfaces cleaner.


Clean the surface very well and allow to fully dry before application. Spray the desired area from about 10 cm distance and be sure to get even coverage. For best results, this sealant should be applied in temperatures above 15 °C (59 F). In these conditions, the sealant should be dry within 15-30 minutes. After allowing to dry, another coat is recommended to ensure even coverage. Please allow the sealant to fully cure for a minimum of 12 hours!

Wolf's nano Textile Sealant nano coating will form a form a super-hydrophobic, self-cleaning shield on textile surfaces. This product is especially useful on textile surfaces where strong surface protection is paramount. This coating forms a layer of protection that is approximately one molecule thick (1 nanometer = 1- 9 meter = 10- 6 micrometers), as the average size of an atom is 0.2 – 0.5 nanometers thick.

Nano surface

A single nano treatment consists of 3 layers: The first or “bonding layer”, forms the foundation of the coating by becoming part of the substrate itself. Being that this layer actually becomes a permanent part of the surface it's being applied to, this SiO2 or “quartz/glass” layer will protect from the elements for an exceptionally long period of time.


The second “filler layer” anchors to the “bonding layer” and fills the gaps between nano particles to form a homogenous nano surface, which is necessary for the for the last layer to form properly.

The third “hydrophobic layer” bonds to the previously formed layer and provides the surface roughness which creates the hydrophobic lotus effect.

Properties of a  super-hydrophobic (nano) coating:

  1. The coating itself is very thin, circa 1 nanometer thick, which can not be seen by the naked eye
  2. The coating forms a very strong bond to the surface and the “bonding layer” is quite difficult to remove
  3. The coating does not “layer”, meaning that adding several layers will not “build” or make a thicker coating. In other words, it will not adhere to itself.
  4. The coating will repel water and dirt/contamination will not form a strong bond to the treated surface. 

In cold weather, the hydrophobicity of nano coatings may decrease! In these conditions, the moisture in the air tends to form a dense layer of moisture on the surface which can “stick” to the surface and prevent water drops from forming because of the constant moisture in the air. The warm air of nano coating improves.

Nano textile coating: Textile Coat is a surface treatment for textiles that will form an invisible, non-sticky layer of protection on the surface. This coating ensures that contamination which comes into contact with the treated surface will not penetrate it and dirt and other contamination can be easily cleaned off. It will also prevent water and other liquids from being absorbed into the surface.