TECH INFO

http://www.itm.hu/

TECH INFO

Tech Info
1; Nano Coatings

What is the difference between Hard Body & Body Guard & Mytery Juice?

The solids content of products shall determine how thick nano ceramic protective layer can be formed on the treated surfaces. The Wolf of nano-ceramic coating layer thickness is also with the Hardbody - Bodyguard - Mystery Juice sequence can be determined. 

Following the normal preparatory treatments the Hardbody can form a layer of about 0.4-0.6 micron thick coating. The Bodyguard can gives about 25% thicker coating with a single treatment. The Mystey Juice can create a coating of approx. 1.5x thicker coating as Hard Body makes. 

Nano Paint Sealant - 
Hard Body

nano-ceramic product which is easy to use, easy to apply, re-erase. We offer the use of nano-ceramic coatings for new nano car care specialists and who use nano ceramic coatings for the first time.
Available: 150 ml & 50 ml 

Nano Paint Sealant - 
Bodyguard

nano ceramic product, create a moderately thick coating what can be safely used in all paint types. We recommend to users who already have been previously tried nano-ceramic coatings. 
Available: 150 ml & 50 ml 

Nano Paint Sealant - 
Mytery Juice

nano-ceramic product with high solids content formulations, which gives the strongest and longest protect to the surface. 
Available: 150 ml & 50 ml 

 

2; Polish products

Strong relief scratch, highly polished cutting pastes, moderately strong one-step finishing and fine pastes can be found in our range.
Scratch removal, by cutting effect:

Heavy Cut Polish (Cut it): for heavily scratched and hard varnish surface polishing, its remover effect is the most effective with rotating polishing machine, we do not recommend the use with DA machine 

Correcting Polish (Correct it): we recommend as first use to remove heavily cutted medium scratched and medium hard anti-scratch varnishes for polishing. DA rotary machine and a machine can be used 

Medium Polish (Polish it): we recommend to use to refine the surface after polishing Heavy Cut Polish or hard coatings. It can be used as one-step polish. 

Finishing Polish (Jewel it): it can be used after the upper mentioned polishing methods, its use depends on the polishing task. 

DIRECTIONS 

On a clean surface, spread the polish evenly at a low speed (rotary 600-900 RPM or DA 2-3) and then work the polish in at 1500-2200 RPM or DA 5-6 *depending on paint type and hardness* with moderate pressure and allow ample time for it to properly break down. Once corrected, reduce the polishing speed and continue polishing the surface until the desired level of refinement has been achieved. For use with a rotary polisher, DA or by hand. 

Heavy Cut Polish - 
Cut it

for heavily scratched and hard varnish surface polishing, its remover effect is the most effective with rotating polishing machine, we do not recommend the use with DA machine.
Available: 0,5 L & 1 L 

Correcting Polish - 
Correct it

we recommend as first use to remove heavily cutted medium scratched and medium hard anti-scratch varnishes for polishing. DA rotary machine and a machine can be used. 
Available: 0,5 L & 1 L 

Medium Polish - 
Polish it

we recommend to use to refine the surface after polishing Heavy Cut Polish or hard coatings. It can be used as one-step polish. 
Available: 0,5 L & 1 L 

Finishing Polish - 
Jewel it

it can be used after the upper mentioned polishing methods, its use depends on the polishing task. 
Available: 0,5 L & 1 L 

 

Display: List / Grid
Show:
Sort By:
Quick Wax 0,5L
Wolf’s “Quickie” is designed especially for those who do not have a lot of time to..
7.20€
Featured
Glass cleaner 1L
11.70€
Car Shampoo 1L
13.50€
Car Shampoo  5L
35.10€
Clay Lube 1L
17.50€
Medium Polish 1L
20.40€
Quick Wax 0,5L
7.20€
Quick Wax 1L
11.52€
Liquid Wax 0,5L
19.00€
Nano Glaze 150ML
10.40€
Nano Glaze 0,5L
17.10€
Nano Polish 0,5L
14.90€
Liquid Wax 225ML
13.90€